When working in harsh environments and in heavy duty applications like welding, it is important to take a multi-angle approach to designing the application. When you are working with existing sensor installations, it is important to consider all the reasons for the sensor’s failure before determining a winning solution. An important step in any application is to protect the connection between the controller and the sensor. In a welding environment, whether the sensor cable fails from weld slag buildup or from physical damage from contact with a part, the cable can be the key to a successful weld-sensing application.
That being said, the number of options available to protect the connection can be overwhelming and at times even confusing. For example, silicone cables vs silicone tube cables. Silicone cables have a jacket that is made out of silicone material over the conductors. This usually allows for a smaller diameter and more variety with the cordsets i.e. length and connector types. On the other hand, a silicone tube cable is a standard sensor cable with a silicone pulled over the cable then over-molded. The silicone tube is a second jacket and the air is a good insulator, prolonging the life of the sensor cable.
Another important consideration is how to even connect your sensor. One option is to install a sensor with a connector. This allows for a quick disconnect from the cable. In this case, it may be better to use a right angle connector, so the bend radius of the cable is not hanging loose. A second option is to install a sensor with cable out. This can have flying leads or a connector added to the end. At times, when there is not enough room to add a cordset, the cable out gives extra space.
To learn more about welding best practices visit www.balluff.us.
