Level detection plays an important role in the food and beverage industry, both in production and filling. Depending on the application, there are completely different requirements for level detection and, therefore, different requirements for the technologies and sensors to solve each task.
In general, we can differentiate between two requirements — Do I want to continuously monitor my filling level so that I can make a statement about the current level at any time? Or do I want to know if my filling level has reached the minimum or maximum?
Let’s look at both requirements and the appropriate level sensors and technologies in detail.
Precisely detecting point levels
For point level detection we have three different options.
A through-beam fork sensor on the outside of the tank is well suited for transparent container walls and very special requirements. Very accurate and easy to install, it is a good choice for critical filling processes while also being suitable for foaming materials.
For standard applications and non-metallic tank walls, capacitive sensors, which can be mounted outside the tank, are often the best choice. These sensors work by detecting the change of the relative electric permittivity. The measurement does not take place in direct contact with the medium.
For applications with metal tanks, there are capacitive sensors, which can be mounted inside the tank. Sensors, which meet the special requirements for cleanability (EHEDG, IP69K) and food contact material (FCM) required in the food industry, are mounted via a thread and a sealing element inside the tank. For conductive media such as ketchup, specially developed level sensors can be used which ignore the adhesion to the active sensor surface.
Continuous level sensing
Multiple technologies can be used for continuous level sensing as well. Choosing the best one depends on the application and the task.
Continuous level detection can also be solved with the capacitive principle. With the aid of a capacitive adhesive sensor, the level can be measured from the outside of the tank without any contact with the sensor. The sensor can be easily attached to the tank without the use of additional accessories. This works best for tanks up to 850 mm.
If you have fast and precise filling processes, the magnetostrictive sensing principle is the right choice. It offers very high measuring rate and accuracy. It can be used for tank heights from 200 mm up to several meters. Made especially for the food and beverage industry, the sensor has the Ecolab, 3A and FDA certifications. Thanks to corrosion-free stainless steel, the sensor is safe for sterilization (SIP) and cleaning (CIP) in place.
If the level must be continuously monitored from outside the tank, hydrostatic pressure sensors are suitable. Available with a triclamp flange for hygienic demands, the sensor is mounted at the bottom of the tank and the level is indirectly measured through the pressure of the liquid column above the sensor.
Level detection through ultrasonic sensors is also perfect for the hygienic demands in the food industry. Ultrasonic sensors do not need a float, are non-contact and wear-free, and installation at the top of the tank is easy. Additionally, they are insensitive to dust and chemicals. There are even sensors available which can be used in pressurized tanks up to 6 bar.
Product bundle for level monitoring in storage tanks
On occasion, both types of level monitoring are required. Take this example.
The tanks in which a liquid is stored at a food manufacturer are made of stainless steel. This means the workers are not able to recognize whether the tanks are full or empty, meaning they can’t tell when the tanks need to be refilled to avoid production downtime.
The solution is an IO-Link system which consists of different filling sensors and a light to visualize the filling level. With the help of a pressure sensor attached to the bottom of the tanks, the level is continuously monitored. This is visualized by a machine light so that the employee can see how full the tank is when passing by. The lights indicate when the tank needs to be refilled, while a capacitive sensor indicates when the tank is full eliminating overfilling and material waste.
To learn more about solutions for level detection visit balluff.com
